Latest Switzerland Public Procurement Notices

IWB, Wenkenköpfli water reservoir The subject of the procurement is the new construction of the Wenkenköpfli reservoir, consisting of the following elements: · Construction site setup · Demolition / dismantling · Securing construction pits and excavation · Creation of the 2 water chambers · Creation of control building (reservoir building) · Plant line trench with sheet piling, securing and excavation · Creation of service lines and shafts The underground structure consists of a reinforced concrete structure with a wall thickness of 40-45 cm. It includes 2 reservoirs Chambers with a usable volume of 300m3 each and a control room with above-ground access. See also appendix A2 list of services. The contract is awarded subject to the existing building permit. Doc Title: IWB, water reservoir Wenkenköpfli Contract Type: works

New construction of the Stein cantonal school - BKP 222 plumbing and flat roof work New construction of the Stein cantonal school - BKP 222 plumbing and flat roof work Doc Title: New construction of the Stein cantonal school - BKP 222 Plumbing and flat roof work Contract Type: works

Cernier, Épervier 4 - Transformation, energy renovation and repurposing of the building / Architect mandate, according to phases 31 to 53 of the SIA 102 standard (CFC 691) Public call for tenders in open procedure for the mandate of architect, according to the phases 31 to 53 of the SIA 102 standard (CFC 691) CFC 191-291-491 are grouped under the code 691. The agent has the possibility of subcontracting the management of works (DT/DLT) as long as the latter is an integral part of his offer and his table organizational. However, the agent remains responsible for his subcontractor, thus avoiding any triangulation of information. This contract concerns the award of an architect mandate, including the management of the works, according to standard SIA 102 (CFC 691), as part of the transformation, energy remediation and repurposing project of the municipal building located at Épervier 4 in Cernier. The mandate includes all study, coordination and implementation services, from the phases from the preliminary project (adaptations linked to the internal organization) until the commissioning and completion of the work. The project concerns a major transformation of an existing building, carried out on a partially occupied site, with a building permit already entered in force. The agent must ensure the coordination of specialized agents, the conduct of tender procedures and the management of the work until the handover of the work. Doc...

Reconstruction of the indoor and outdoor swimming pool Talegg 8424 Embrach / 211 BKP 221 master builder's work Doc Title: Reconstruction of the indoor and outdoor swimming pool Talegg 8424 Embrach / 211 Contract Type: works

Three (3) framework contracts in the field of ultrasound will be tendered across several application clusters. The USZ currently operates more than 230 ultrasound systems in a wide variety of medical and specialist areas. The devices are used in diagnostics, for interventional applications, as well as for research and teaching or training. With their ultrasound product portfolio, providers must be able to fully cover the medical clusters/disciplines defined by the USZ to ensure the supply and delivery of the USZ at all times. Place of contract fulfillment Switzerland Main CPV: 33112000 Echo, ultrasound and Doppler imaging equipment

Program Main CPV: 45331200 Installation work of ventilation and air conditioning equipment

Construction work for the 3rd stage of renovation of Retschwilerstrasse, Hitzkirch Main CPV: 4,500,000 construction works

Program Main CPV: 45331100 Central heating installation work

Construction of a boiler room for the Carouge swimming pool, intended Main CPV: 45000000 Construction works

The Laboratory for Inorganic Chemistry at ETH Zurich is planning to procure an integrated UHV cluster for pulsed laser deposition (PLD) and sputter deposition of heterostructures made of oxide and metal layers. The system is intended to facilitate material synthesis Allow oxide substrates with an area of ​​up to 10 x 10 mm2. It will consist of a PLD chamber, a sputtering chamber, a central UHV transfer chamber and a lock chamber for exchanging samples and PLD targets, excluding the process chambers to ventilate. All chambers must have base pressures below 1 x 10-7 mbar. The PLD chamber must be equipped with a KrF excimer laser and in-situ high pressure RHEED and for routine epitaxial oxide growth at high temperatures around 1100 °C be suitable. The sputtering chamber must enable DC and RF magnetron sputtering of metal and oxide layers, including reactive sputtering in Ar/O₂ atmospheres, with substrate heating up to at least 700 °C using a sample support system that is compatible with the PLD chamber is compatible. The system must allow sample transfer to an external UHV transfer case and provide UHV-compatible ports for future expansion of the cluster. For further details see specification document. Main CPV: 38000000 laboratory devices, optical devices and precision devices (except glasses)