Latest India Public Procurement Notices

Supply of Relay-QN1 (Contact configuration 12F/4B or 8F/8B as requirement of consignee) 2 A2 30.00 Numbers 5054.37 151631.10 AT Par 151631.10 Above/ Below/P ar

Provision of Automatic Fire Detection and Alarm System (AFDAS) at Verna, Mirjan, Kundapura & Udupi (Central, North & South Cabins). And Provision of Aspiration Type Air Sampling Detectors (ASD) at Thokur and two cabins at Majorda including integration/interfacing with the existing system in Karwar Region of Konkan Railway, as per RDSO Specification No. RDSO/SPN/217/2025 Ver. 3.1 or latest
Supply, installation, testing and commissioning of UL/EN/FM/Vds/LPCB approved microprocessor based networkable analogue addressable and modular type of fire alarm control panel with display, in built change facility and provision of GSM module suitable to send SMS to mobile etc. The panel should be equipped with sufficient Nos. of loops and provision of expandability The control panel shall be the central processing unit of the system receiving and analysing signals from probe type bimetallic heat detectors, UV & IR f lamedetectors, heat and smoke multi sensors, LHS interface and manual call points, providing audiable and visual information to the user. The panel shall have provision of connectivity of TCP - IP suitable for programming and remote monitoring. The panel shall have dedicated RS232 serial port for direct PC or MODEM connection for interfacing with existing Datalogger, optional remote printer as per RDSO Spec No. RDSO/SPN/217/2025 Ver.3.1 with latest Amd. Inspection: RDSO Inspection 2 A2 6.00 Numbers 3286.46 19718.76 AT Par 19718.76

Procurement and fitment of VCD in ICF make DETC at KKW of Ratnagiri region : Supply shall include Fitment of VCD in ICF make DETC at KKW station of Konkan Railway in Ratnagiri region Vigilance Control Device. MICRO CONTROLLER BASED VCD should be Standalone VCD of approved make conforming to RDSO specification No.MP-0@ 46"464610@(Rev.04) Dec 2008 and AMDT. OF MARCH 2010
For providing in DETC - Stand alone Vigilance Control Device. MICRO CONTROLLER BASE D VCD should be Standalone VCD of approved make confirming to RDSO specification No.MP 0@46"46 46@04 (Rev.04) Dec 2008 and AMDT OF MARCH 2010 [ Warranty Period: 30 Months after the date of delivery ] ]
Contract Category: Expenditure

SWRUSSOR-2022 Item No.063100-Removing seized ERC from SGCI inserts of existing track by using suitable approved chemicals and re-fixing after greasing of insert eye and ERC with Contractor's grease of specified quality as per provisions of IRPWM, as directed by Engineer in- charge. Note: 1.List of Seized ERC along with location shall be prepared after inspection of SSE/P.Way and marked prior to execution of this item. 2. Due care shall be taken to avoid any damage to the sleeper 3.A penalty of 50% of the basic cost of new sleeper in nearest sleeper factory shall be levied on each, if SGCI insert is broken or sleeper gets cracked in the process. 2 063140 250.00 Each 244.68 61170.00 15.59 70706.40

202010--Manufacturing, fabricating and supplying retro-reflective Level Crossing Indicator boards, made of 2mm thick aluminium sheet or 3mm thick aluminium composite sheet, face to be fully covered with high intensity encapsulated type heat activated retro-reflective sheeting conforming to type-IV of ASTM-D4956-01 in yellow & black or other colour combination including subject matter, message, symbols, borders etc. as approved by Engineer In-charge or as per IRPWM guidelines, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class-2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back-support frame of M.S. angle iron of size 25mm x 25mm x 3mm provided all along the edges of board with theft resistant measures, back side of board shall be with non-peelable weather-proof paint, consisting of one coat of zinc chromate primer and two coats of epoxy paint. Vertical post shall have black & white anti-corrosive paint or powder coating complete, as directed S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit Schedule () 2-Schedule-B 177336.31 Above/ Below/P ar 1 01 50.00 cum 60.00 3000.00 150.83 7524.90

ADVANCE VERSION OF LASER WHEEL PROFILOMETER MODEL LPM-5 ALONG WITH STAN DARD ACCESSORIES [ Warranty Period: 30 Months after the date of delivery ] ]
Contract Category: Expenditure

LOCK FOR TRANSITION AND NON TRANSITION COUPLER CBC TO RDSO DRG NO SK-6272 4 ALT 31 ITEM NO 8 WITH TECHNICAL REQUIREMENT AS PER RDSO SPECIFICATION NO WD-70-BD-10 R EV 3 OR LATEST TO RLY PL 371300070034-KRPL38137040 [ Warranty Period: 30 Months after the d ate of delivery ] ]
Contract Category: Expenditure

Upkeeping and Cleaning of RRM/RN office and Store office at Ratnagiri on day-to-day basis including maintenance in morning and afternoon session etc. complete.

Mandatory Kit for Slack Adjuster Irsa 600 Type Consisting of 8 Items to Rdso Drg no Wd 82064 s 01 Rc Alt 12 Item no 2 4 6 18 25 27 34 and 43 Item no 2 18 and 43 02 Nos each Item no 4 6 25 27 and 34 01 no Detailed Specification Attach
MANDATORY KIT FOR SLACK ADJUSTER IRSA 600 TYPE CONSISTING OF 8 ITEMS TO RDSO DRG NO WD 82064 S 01 RC ALT 12 ITEM NO 2 4 6 18 25 27 34 AND 43 ITEM NO 2 18 AND 43 02 NOS E ACH ITEM NO 4 6 25 27 AND 34 01 NO DETAILED SPECIFICATION ATTACH [ Warranty Period: 30 Mont hs after the date of delivery ] ]
Contract Category: Expenditure

Kit For Dirt Collector Consisting of 2 items in one kit 1 Gasket to RDSO Drg No WD 92051 S 05 Alt No 5 Item No 4 Qty Per Kit 1 Nos and 2 Washer to RDSO Drg No WD 92051 S 05 Alt No 5 Item No 5 Qty Per Kit 1 Nos conforming to
Kit For Dirt Collector Consisting of 2 items in one kit 1 Gasket to RDSO Drg No WD 92051 S 05 Alt No 5 Item No 4 Qty Per Kit 1 Nos and 2 Washer to RDSO Drg No WD 92051 S 05 Alt No 5 Item No 5 Qty Per Kit 1 Nos conforming to [ Warranty Period: 30 Months after the date of delivery ] ]
Contract Category: Expenditure