The subject of the order includes construction works consisting in the reconstruction of district roads No. 1835L and No. 1840L by constructing a hardened external strip as part of the investment task called Reconstruction of district roads No. 1835L and No. 1840L. Scope The material order includes: 1. Measurement works on linear earthworks on a section of 3,056 km2. Preparatory and demolition works.3. Earthworks.4. Foundations.5. Hardened roadside surface.6. Hardening the area at the bus stop.7. Making a hardened outer band.8. Construction of a dirt roadside.9. Construction of exits 10. Finishing works.11. Construction of vertical and horizontal markings and BRD devices.12. As-built geodetic measurement.

Partial renovation of asphalt surfaces of county roads with hot mineral-asphalt mixtures in 2026, divided into 2 parts in the scope specified below: PART I - county streets of the city of Koa, extra-urban roads in the Koo, Kocielec, Babiak communes, Osiek May Partial renovation of bituminous asphalt surfaces, grade II mineral and asphalt mixtures with manual edge cutting and lubrication with cation emulsion with an area of ​​0 10 m - 1,540 m, Partial renovation of bituminous asphalt surfaces, mixtures mineral asphalt stage II with manual edge cutting and lubrication with cation emulsion with an area above 10 m - 250 m,

Strain

Reconstruction of an access road with a parking lot in the village of Skudrinje

1. The subject of the order is the performance of construction works aimed at adapting the main entrance to the building of Public Kindergarten No. 23 in Jastrbie-Zdrój for the needs of people with disabilities.2. The task involves the construction of a steel ramp with balustrades. The investment in question will include the following works: moving part of the hexagonal cube (trylinka) in front of the ramp (parking lot) in order to level the ground and obtain uniform terrain elevations; placing part of the paving stones in front of the ramp will obtain uniform terrain elevations; demolition of the existing platform and construction of a new one from paving stones; lowering part of the existing curb; preparatory and measuring work; excavations and trenching of the excavation under the ramp with paving stones; waste collection and disposal; disposal of non-building land to a landfill; construction of foundation walls for the installation of the palisade; making a foundation of stone fattening; construction of a ramp made of paving stones with palisade edges according to the drawings of the documentation; replacing the entrance door with 80/200 cm by 90/200 cm; moving the existing bell located in the door frame to the other side of the door frame...

1. The subject of the order is a service under the task titled: Replacement of water meters as part of the task titled: Modernization of the water and sewage system in the Mokrsko commune, stage II.2. The subject of the order includes in particular: 1) delivery, replacement and installation of 882 water meters standard for radio water meters with induction inputs and ICT software for remote readings, together with the installation of ICT system overlays for remote reading, as well as the purchase and implementation of software for remote reading and processing of data for the area Mokrsko commune. Water meters, adapted for installation of a radio module enabling remote reading of their readings, must at the same time be protected against the action of a strong magnetic field, within the scope specified in Annex No. 1 to SWZ.2) providing the necessary technical description (in Polish) - if applicable3) delivery together with the order of the manual required for operation in Polish, if applicable4) quality warranty granted for a period consistent with the content of the contract and resulting from the Contractor's offer for the delivered products on terms no worse than the manufacturer's warranty, confirmed by separate warranty documents delivered...

1. Part No. 1. Modernization of the heat source.1.1. Scope of work: 1) Ground heat pump. Ground heat pump: nominal power 35 kW, brine/water type, 2) Lower source. 8 vertical wells, 90 m each, total length 720 m, PE100-RC probe pipes 40 mm, double U, infill thermally conductive (silica bentonite), carrier: 30% propylene glycol solution, spacing between wells: approx. 8 m, in accordance with PZT, each well with shut-off and the possibility of flow balancing. 3) Distribution well. prefabricated PE, length 1200 mm, thickness 1.8 m, equipped with distributors and balancing valves. All work related to the lower source of the heat pump should be carried out in accordance with the guidelines of the manufacturer of the pipes used. The designed pipelines are run by, among others, 20-40 cm below the frost zone, the supply pipelines should be placed at a distance not less than 70-80 cm from each other and from other pipelines. In addition, special attention should be paid when filling the hole ring to ensure it is complete, without defects and gas spaces. The filling should be done with a liquid filling mass. Pipe purpose casing: inserting and routing the supply lines for the brine circuit (a pair of supply and return pipes...

1. The subject of the order is the reconstruction, expansion and roofing of the stands with photovoltaics and energy storage, which will consist in: - removal of the existing seats together with fastening elements and concrete seat bases; - reconstruction of the stands structure, replacing the seats with new ones and installing barriers at the extreme entrances to the stands and behind the last row of seats; - roofing the stands with a steel roof based on steel poles; - installing photovoltaic panels on the stands roof and placing the energy storage with the inverter on a structural pole; - hardening the area with paving stones. As part of the order, an as-built inventory should be performed.2. The detailed scope of the subject of the order is specified in the Bills of Quantities and Cost Estimates tenders, technical documentation and the Detailed Technical Specification constituting annexes to the specifications of the order conditions.

1. The scope of the subject of the order includes the reconstruction of municipal road No. 106811B (ul. Eromskiego in Kleosin) consisting in the construction of a speed bump on plots no. 323/2, 114/1 and 306/1 in the Kleosin district. 2. A detailed description of the subject of the order is included in specification of the terms of the order and the attached design documentation, and the documentation constitutes Annex No. 2 to the SWZ.

Renovation of the surface of provincial road No. 686 Zajma-Michaowo-Jawka at km 36+100 to 37+500.