ACHILLES UTILITIES NCE is a joint qualification system for suppliers and contractors to utilities in Nordics and Central Europe. It's operated by Achilles under Article 77 of Directive 2014/25/EU. The subscribing utilities will use ACHILLES UTILITIES NCE for tenderer selection for contracts and framework agreements subject to EU procurement rules, but reserve the right to publish individual notices for specific requirements where they deem it necessary, even though they relate to the product and service categories covered by ACHILLES UTILITIES NCE. The qualification system may be used for contracts not subject to EU procurement rules at each subscriber's discretion. An overview of products and services acquired through ACHILLES UTILITIES NCE is available here https://www.achilles.com/wp/wp-content/uploads/2023/05/Product-and-Service-Code-Guide-EN.pdf
Doc Title: Enida LTD
Contract Type: supplies

Framework agreement includes concrete products for VA, land and construction. For example in the form of VA pipes, concrete slabs, concrete edge support, ground stone and GCM support. Agreements are used both in operation and investment Concrete products Framework agreement includes concrete products for VA, land and facility. For example in the form of VA pipes, concrete slabs, concrete edge support, ground stone and GCM support. Agreements are used both in operation and investment Doc Title: Concrete products Contract Type: supplies

Replacement of sand in sandboxes and sand fields located on the property constituting the municipal resources of the City of Zabrze.

1. The subject of the order is the successive delivery of granite stone masonry and its installation on municipal roads, internal roads and municipal areas of the City and Commune of Grabw nad Prosn. 2. The material scope covered by these proceedings includes comprehensive implementation the subject of delivery consisting in the delivery of fattening and its installation, i.e. at least: 1) delivery of fattening to the place of installation indicated by the Ordering Party and its installation, including loading, transport and unloading; 2) preparation of the site; 3) securing the area robt; 4) profiling of the renovated section or construction of a riverbed; 5) uniform spreading with mechanical profiling over the entire width of the indicated section with a layer thickness agreed with the Ordering Party or filling in the gaps locally, supplementing single bumps or ruts; 6) compaction, taking care of the spread aggregate to obtain the compaction index. The contractor is obliged to estimate all expenditure necessary to complete the order, including preparation of the substrate and profiling of the renovated section. or channeling, as well as the removal or management of excavated material. The contractor, when estimating the supply of aggregate, includes the offer price...

4.1. The subject of the order is delivery entitled: Purchase and supply of road aggregate intended for road renovation in the Annopol Commune in 2026.4.3. Detailed description of the subject of the order: 1) Delivery of natural road aggregate intended for renovation viscous sorted mixture of fractions 0-31.5 mm in an amount of 2990 tons.2) The aggregate must meet the requirements of the PN-EN 13242 standard. NOTE: The final aggregate mixture delivered cannot be clay at all, it is not allowed to use mixtures that do not meet at least one condition of the specification or any technological mixtures of the second grade and the like. It must meet the appropriate requirements of WWiORB No. D-04.04.02 specified for road surfaces (Appendix No. 9 to SWZ). The requirements for the aggregate mixture should be confirmed by a certificate issued by the entity authorized to control quality.3) Deliveries will be made successively to the place indicated by the Ordering Party in the Annopol Commune, after the Ordering Party submits by e-mail a periodic demand for delivery, with specifying the amount of material and place of delivery.4) The Contractor undertakes to notify the Ordering Party at least one day in advance about ...

PART I Sand 0/2 mmTechnical requirementsGrain size: 0/2 mm fraction.Grain size range: from 0.0625 mm to 2.0 mm.Continuous grain size, in accordance with the requirements of PNEN 12620 or equivalent.Material and quality requirementsThe aggregate must meet the requirements of the following standards: - PNEN 12620 Aggregates for concrete, - PNEN 13139 Aggregates for mortars, - PNEN 13242 Aggregates for unbound and hydraulically bound materials, - PNEN 13043 Aggregates for bituminous mixtures, or equivalent standards. Sand should be: - free from organic contaminants, - without admixtures of clay in the lumps and humus parts, - without foreign contaminants (metal, glass, wood, construction waste), - with a silt content in accordance with the requirements of the standard applicable to a given application. Formal requirements The contractor is obliged to submit to requesting the Ordering Party: - Declaration of Performance, - documents confirming compliance with the standard, - current laboratory tests (not older than 12 months).

1. The subject of the order is the purchase of non-sort basalt with a fraction of 0-31.5 mm and delivery to the place indicated by the Ordering Party in the Zielona Góra District in accordance with the description of the subject of the order (Appendix No. 3 to SWZ).2. total quantity of unsorted items ordered basalt is: up to 1,836 tons.3. The aggregate must meet the conditions of the PN-EN 13242 standard - aggregates for bituminous and surface mixtures permanently used on roads, airports and other surfaces intended for traffic, or an equivalent standard.4. Ordering party informs that if the description of the subject of the order contains references to standards, it is allowed to have equivalent documents confirming the fulfillment of the technical and operational parameters of the offered aggregate specified in the description of the subject of the order, as minimum requirements.5. By the concept of equivalence, the ordering party understands that the aggregates meet the requirements specified in the above-mentioned. standard in terms of: Grain size, Grain size, Dust content, Dust quality, Sand index, Density of grain fractions, Water absorption, Frost resistance, Shape Index, Straightness Index, Sun Damage, Crush Resistance, Abrasion Resistance...

Supply and transportation of ballast for the construction of the Rincón de Soto bypass. Castejón - Logroño Line (La Rioja) Doc Title: Supply and transportation of ballast for the construction of the Rincón de Soto bypass. Castejón - Logroño Line (The Rioja) Contract Type: supplies

Extra salt (Nacl) in tablets (25 kg/bag) Classifier DK 021:2015: 14430000-4 Evaporated salt and pure sodium chloride

14410000-8 — Rock salt), salt weight 25 kg. Classifier DK 021:2015: 14410000-8 Rock salt